The Puffco Peak Pro is a glass vaporizer that can be easily cleaned with isopropyl alcohol and a cotton swab. First, remove the mouthpiece and the bowl from the body of the vape. Next, soak a cotton swab in isopropyl alcohol and clean the inside of the mouthpiece and the bowl. Finally, reattach the mouthpiece and bowl and allow them to dry completely before using the vape again.
The Puffco peak ceramic bowl can be cleaned with isopropyl alcohol. First, remove the bowl from the peak and soak it in isopropyl alcohol for a few minutes. Then, use a cotton swab to scrub away any burnt residue. Finally, rinse the bowl with water and allow it to dry.
The Puffco can be cleaned with isopropyl alcohol. First, remove the battery and the coil. Next, soak a cotton ball in isopropyl alcohol and wipe down the inside of the device. Finally, rinse with water and replace the coil and battery.
The Puffco can be cleaned by using a cotton swab and isopropyl alcohol.
To clean opalescent glass, you can use a mixture of ammonia and water. You can also use a glass cleaner with a ammonia-based solvent.
Puffco glass can be put in the dishwasher, but it is not recommended. The intense heat of the dishwasher could cause the glass to break.
Ceramic is not a combustible material, so it cannot be “torched.” However, if it is exposed to a high enough heat source, it will begin to break down and release gases. These gases can then be ignited, causing a fire.
Puffco bowls can be cleaned with isopropyl alcohol or a cleaning solution specifically made for vape pens. Bowls should be cleaned after each use to prevent residue from building up.
Yes, you can soak an atomizer in alcohol. This will help to clean the atomizer and remove any built-up residue. Be sure to rinse the atomizer thoroughly after cleaning to remove all of the alcohol.
Yes, the Puffco Peak atomizer can be soaked. Soaking it in a cleaning solution will help to remove any built-up residue or cannabis oil.
There are a few ways to remove cloudiness from glass. One is to use a chemical cleaner, such as Windex. Another is to use a baking soda and water paste. You can also use a vinegar and water solution.
There are a few ways to make old glass clear again. One way is to use a chemical called hydrofluoric acid. Another way is to use a chemical called sodium hydroxide.
